Audio-Technica AT-VM95C/H
The AT-VM95C/H pairs Audio-Technica's dual moving magnet AT-VM95C cartridge with a 0.6 mil conical stylus, pre-mounted on the AT-HS6 headshell for tonearms using a universal half-inch, 4-pin mount. It's a plug-and-play upgrade with a punchy 4.0 mV output, ready to install straight out of the box.
- SKU: AT-VM95C/H
- Brands: Audio Technica
- Cartridge type: moving magnet
The AT-VM95C/H is a ready-to-install combo kit from Audio-Technica's VM95 Series, pairing the entry-level AT-VM95C dual moving magnet cartridge with the AT-HS6 headshell. The cartridge arrives pre-mounted with lead wires already connected, so there's no fiddly wiring or alignment guesswork for tonearms using a universal half-inch, 4-pin mount. A 0.6 mil bonded conical stylus on an aluminum cantilever keeps tracking forces light (1.8-2.2 g, 2.0 g recommended) while a specially wound coil pushes out a strong 4.0 mV signal for a lively, dynamic sound.
Frequency response spans 20 Hz to 20,000 Hz with 18 dB of channel separation at 1 kHz, giving a clean, well-separated stereo image for the price point. Because it shares the VM95 platform, the stylus alone can later be swapped for a higher-tier AT-VMN95 replacement to upgrade the sound without buying a new cartridge or headshell. Mounting screws, nuts, a stylus guard and instruction manual are all included in the box.
- Type: Dual Moving Magnet (VM95 Series), Pre-Mounted Combo
- Stylus: 0.6 mil conical, bonded, aluminum cantilever
- Frequency Response: 20 Hz - 20,000 Hz
- Output Voltage: 4.0 mV Nominal (1 kHz, 5 cm/sec)
- Channel Separation: 18 dB (1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
- Recommended Load Impedance: 47,000 ohms
- Mounting: Half-inch, pre-mounted on AT-HS6 headshell
- Cartridge Weight: 6.1 g (Cartridge & Headshell: 15.5 g)
- Replacement Stylus: AT-VMN95C
- Category: Entry level
- AT-VM95C cartridge pre-mounted on AT-HS6 headshell with lead wires attached
- Mounting screws & nuts
- Stylus guard
- Instruction manual
Delivered across India in 3–5 business days. Heavy hardware items are packed in safe, multi-layered cushion packaging.
Collect in person at our Noida location. We'll notify you when your order is ready.
7-day returns if the condition or performance differs from description. Heavy items are fully insured during transit.