Audio-Technica AT-VM95E
The AT-VM95E is a dual moving magnet cartridge with a 0.3 x 0.7 mil elliptical stylus, designed for half-inch mount turntables. It delivers a strong 4.0 mV output with excellent channel separation and low distortion, housed in a durable, low-resonance body that mounts with just two screws. The stylus can be swapped for any of the six interchangeable AT-VMN95 replacements.
- SKU: AT-VM95E
- Cartridge type: moving magnet
- Brands: Audio Technica
The AT-VM95E from Audio-Technica's VM95 Series is a dual moving magnet cartridge designed for turntables with a standard half-inch mounting system. A specially wound coil design delivers a strong 4.0 mV output while maintaining excellent channel separation and low distortion, resulting in a natural, well-balanced tonal signature. The durable, low-resonance housing features threaded inserts, so the cartridge mounts directly to the headshell using just two screws, with no separate nuts required. As part of the interchangeable VM95 platform, the stylus can later be swapped for any of the six available AT-VMN95 replacement styli, allowing an easy sound upgrade without replacing the entire cartridge body.
- Dual moving magnet design from the VM95 Series
- 0.3 x 0.7 mil elliptical bonded stylus on an aluminum cantilever
- Specially wound coils for a strong 4.0 mV output
- Wide 20-22,000 Hz frequency response with 20 dB channel separation
- Durable, low-resonance housing with tool-free two-screw headshell mounting
- Compatible with all interchangeable AT-VMN95 replacement styli
- Fits standard 1/2" mount headshells and tonearms
- Type: Dual Moving Magnet (VM95 Series)
- Stylus: 0.3 x 0.7 mil elliptical, bonded, aluminum cantilever
- Frequency Response: 20 Hz - 22,000 Hz
- Output Voltage: 4.0 mV (1 kHz, 5 cm/sec)
- Channel Separation: 20 dB (1 kHz)
- Channel Balance: 2.0 dB (1 kHz)
- Vertical Tracking Force: 1.8-2.2 g (2.0 g recommended)
- Vertical Tracking Angle: 23 degrees
- Recommended Load Impedance: 47,000 ohms
- Recommended Load Capacitance: 100-200 pF
- Coil Impedance: 3.3 kOhm (1 kHz)
- DC Resistance: 485 ohms
- Coil Inductance: 550 mH (1 kHz)
- Static Compliance: 17 x 10^-6 cm/dyne
- Dynamic Compliance: 7 x 10^-6 cm/dyne (100 Hz)
- Mounting: Standard half-inch (2-hole)
- Cartridge Weight: 6.1 g
- Dimensions: 17.2 mm (H) x 18.9 mm (W) x 28.3 mm (D)
- Replacement Stylus: AT-VMN95E
- AT-VM95E Phono Cartridge
- Two 11 mm installation screws
- Two 8 mm installation screws
- Two washers
Delivered across India in 3–5 business days. Heavy hardware items are packed in safe, multi-layered cushion packaging.
Collect in person at our Noida location. We'll notify you when your order is ready.
7-day returns if the condition or performance differs from description. Heavy items are fully insured during transit.